This report is a Master?s Thesis performed by Andreas Adolfsson and David Jacobsson atChalmers University of Technology. The purpose of this master?s thesis is to evaluate anew method for load-shedding, the voltage controlled underfrequency load-sheddingdeveloped by ABB. This report presents a comparison between conventionalunderfrequency load-shedding and this new method for load-shedding.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

The purpose with our thesis is to understand and explain the advantages and disadvantages there is with the self scanning system. The advantages and disadvantages we will highlight from three different angels; the store management perspective, the staff perspective and the customer perspective. These three perspectives will together form an overall perspective over the advantages and disadvantages as the self scanning system has contributed with. Finally we will highlight the differences and resemblances we have found between the perspectives.Through a qualitative approach we have gathered data to our thesis. Furthermore we have based our theory chapter and our empirical chapter on the base of Grounded Theory.

This final year project is dedicated to investigate the problem domain of system maintenance management. The purpose is to find problems in the system maintenance management of today. Whether there is any problem that can be elicitated in the requirements engineering?s phase that could help to obtain more maintenance management friendly systems and if it is not possible to obtain more maintenance management friendly, what else can be done?It has been learned that there are many problems today in the problem domain and the most great ones are the system documentation, stress and a systemknowledge lack among developers, system managers and system users.The requirements that have been found for this problem is good documentation, and use of simple solutions in the creating of the system..

This study will shed light on the subject of system management and system management models. It is important that everyone within an administrative organization understand business objectives and needs of the users who work with the systems. It is vital for the activity to form a structured approach for its management, which includes a system management model. Every company has its individual system management model that is tailored to support their management of a business IT systems. According to Brandt (2000), a system management system model is defined as "an idealized image of how you want the system management work is conducted".

The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.

Background: An effective management of the healthcare's organization on one disaster site is considered as a condition in order to decrease damages and suffering at them as been hit of an accident. In KAMEDO-reports is described true accidents, how among other thing organizational parts been implemented and evaluations of which importance different decisions had. Aim: The aim of the study was to examine KAMEDO-reports concerning prehospital medical management on disaster sites. Method: Eight KAMEDO-reports was examined with focus on organization and management. Results: Four areas in which all could be influenced by the healthcare personnel in leading position was described: Management and Co-operation, Load and Go - Stay and Play, Priority and Triage.

This thesis examines how knowledge management professionals use trust as a component in the creation of knowledge management systems, and what methods they use for building trust.Adopting a grounded theory approach, interviews with 8 knowledge management professionals active in different industries served as the base for an analysis that identified trust to be the single most important common factor in the data. The concept of trust used by the informants was identified as relating to the knowledge management system itself, rather than other users, employees or groups in an organisation.Building trust, the KM-professionals mainly focused on three methods: simple solutions, system superiority, and implementation security. Using these methods, the KM-professionals seek to ensure system trust by creating opportunities for users to obtain positive experiences of using the system, and thereby generate a foundation for a trust-based relationship between the user and the system..

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

There are regulations in sweden that require organizations to manage occupational,  health and safetey (OH&S) issues in a systematic way. The contents of the management system vary depending of the activity of the specific organisation. An accurate management system is crucial in order to assure that rules and regulations are fullfilled. The OHSAS 18001 standard covering OH&S management is intended to provide organizations with the elements of an efficient OH&S management system. The work with this thesis was done at Swemat AB in Härnösand wich is a mechanical industry. In the thesis, the requirements of the OHSAS standard are compared with the current management system.

Today an increasing number of schools and organizations are investing in so called Learning Management Systems. Researchers disagree on the pedagogical value of these tools. Some mean that Learning Management Systems cement old-fashioned behaviouristic teaching practices; others mean that the systems provide good opportunities in supporting learning in a socio cultural perspective. The aim of this study is to reach better understanding and increased knowledge of how the introduction of a Learning Management System influences the role of the teacher and how the learning is organized. We have conducted two case studies.

For systems with multicore processors contention for shared resources is a problem that occurs when several memory-intensive processes are executed in parallel within the same memory domain. This contention has a direct influence on the performance of the system and is a complex problem that has been recognized for a long time. An attractive and actively studied way to minimize this problem is by using a process scheduler adapted to allocate processor cores in a way such that contention for shared resources is minimized.With the introduction of multicore NUMA-systems (Non-Uniform Memory Access) the situation has become even more complex. In these systems the access time for processor cores to different memory domains vary depending on factors such as distance and load. Thus, the process scheduler also has to consider where the memory of each process is placed to minimize the distance and balance the load on each memory domain.This report presents a user-level process scheduler for a NUMA-system based on the multicore processor Tilera TILEPro64.